Do you have a question about the Nexgrill 720-1046 and is the answer not in the manual?
Connect component 6 to the main structure as per the diagram.
Join base parts 5 and 7 using the specified hardware.
Secure side panels 1, 2, 3, and 4 to the grill's base.
Fasten side panels 8 and 9 to the primary grill frame.
Attach the lower support beam (part 10) using screws.
Secure the top crossbar (part 11) to the frame.
Route and secure the internal wiring harness (part 13).
Attach the lockable casters to the bottom of the grill.
Secure the main grill body (part 21) onto the assembled frame.