WARNINGS
1. Read the manual carefully before you use the projector.
2. Unplug immediately if you notice any issues or problems with your
projector.
If your projector begins to smoke, make unusual noises, or any strange
odor is noticed, immediately unplug your projector. Ensure that it is
placed in an open area with ventilation, away from any objects that
may be a fire hazard. Contact Customer Support for further details.
3. Do not remove the projector cover.
This projector contains high voltage circuitry. Inadvertent contact may
result in a severe electric shock and could result in death. Do not
attempt to service this product yourself. Please contact the
manufacturer directly if you have any issues to exercise your warranty.
4. Do not modify this equipment.
5. Avoid dropping or throwing the projector.
6. Do not face the projector lens to the sun.
7. Use only the provided power cable.
8. Do not place the projector on an uneven or unstable surface, or one
that is subject to vibration.
9. Do not place this device near another device that produces a
strong magnetic field or one with a heavy electrical load.
10. Do not look into the lens when the projector is operational. It may
cause permanent eye damage.
11. Do not turn off the main power abruptly or unplug the projector
during operation. Wait until the fan has turned off before powering
off fully.
12. Do not attempt to use the projector in a vertical orientation.
EN 26
To Next Page
Loading...
