AMPLIFIERS
PS8Amp & PS10Amp
The PS8Amp and PS10Amp are power amplifiers tailored for PS8 and PS10 system and their respective
LS400 & LS500 sub bass requirements. Their structure and power being identical, they share the same
specifications:
• Total integration of a TDcontroller (with internal sense connection) which specifications are identical of
those of an independent TDcontroller described in the chapter “TDcontroller REFERENCE GUIDE” page
23
• 2 or 3 channel instantaneous configuration via front-panel switch, allowing a 3-WAY use with the
appropriate sub bass or a 2 WAY (wideband) configuration. Power delivered by the amplifier is thus
optimized for the proper configuration. Speaker wiring of each cabinet is also automatically re-assigned.
• All connections and controls located on the front panel including mains fuses and voltage selection.
• Super silent, back to front, variable speed fan cooling.
• 3 units high.
Inputs
Each balanced Line Input has a chaining male connector for operation of
multiple PSAmps.
The L&R link switch simplifies Mono wiring when independent PSAmp stacks
are used for stage Left and Right.
To Next Page
Loading...
Need help?
General
