Next Level Racing F-GT - SEAT ASSEMBLY; Step 4: Seat Side Frames to Seat Base; Step 5: Angle Mounts to Seat Base; Step 6: Seat Back to Angle Mounts

F-GT SIMULATOR COCKPIT
For assistance please contact: support@nextlevelracing.com
www.nextlevelracing.com
Step 5:
4 X 16MM BOLTS.
Repeat both sides.
Step 4: SEAT ASSEMBLY
Attach ANGLE MOUNTS to SEAT BASE
Step 6:
Attach SEAT SIDE FRAMES to SEAT BASE
2 X 16MM BOLTS.
Repeat both sides.
3 X 16MM BOLTS.
Repeat both sides.
Attach SEAT BACK to ANGLE MOUNTS
Angle Mounts
SEAT SIDE FRAMES
PLEASE NOTE: DUAL NUT PLATE SITS
INSIDE SEAT SLIDER FRAME