• Before first use, check that any securing tape and all packaging
has been removed from the glass tray and turntable ring
assembly.
• These parts must never be restricted from rotating.
• N
ever place the glass tray upside down.
• To assemble the turn table, follow the steps below in
number
order.
STEP 1) The turntable shaft should slot into the centre of the
microwave
STEP 2) T he turntable ring slot into the indents in the middle
STEP 3) The glass tray should align with the turntable shaft
The glass tray, turntable ring, and turntable shaft assembly must
always be used during cooking (as shown below).
• Do not place the food directly onto the glass tray, always place on or
in suitable microwaveable cookware.
Please check that crockery is microwave safe before using.
• If the glass tray or turntable ring assembly has been damaged in
any way, please contact the
spares helpline number detailed on
page 32
15
TURNTABLE INSTALLATION
To Next Page
Loading...