Next 792296 - Bunk Bed Assembly Steps; Step One: Frame Assembly; Step Two: Bar Attachment; Step Three: Side Rail Installation

ASSEMBLING THE BUNK
1. Attach frame 1(×4) to pole 2(×2) and
3(x2) with 16 × bolts(A) using allen key (G) to
tighten.
1. Attach 4 × bars 4 to assembled end frame with
8 x bolts(B) and using allen key (G) to tighten.
1. Attach side rail 5,6 and 7(x2) to the assembled
end frame with 16 × bolts(D) and 16 × washers(E)
using allen key(F) to tighten.
STEP TWO
STEP ONE
STEP THREE
Page 3 of 9