Next 792296 - Step Four: Slat Placement; Step Five: Barrier 9 Attachment

1. Attach slats 8 (×46) to the assembled unit. A
rubber mallets (not supplied) may be required to
gently tap each slat into the slat locks on each side
of the bed rails.
1. Attach barrier 9 to assembled unit with 4 ×
bolts(A) using allen key(G) to tighten.
1. Insert 2 × bolts(C) to assembled unit using allen
key(G) to tighten.
STEP FIVE
STEP SIX
STEP FOUR
Page 4 of 9