The Next Austin Dining Chair is a piece of furniture designed for dining purposes, requiring assembly before use. It is produced in China for Next Retail Ltd.

Function Description:

The Austin Dining Chair serves as seating for dining areas. It is designed to be assembled by the user, with clear instructions provided to guide the process. The manual emphasizes the importance of checking all components and colors before assembly to ensure customer satisfaction and a smooth returns process if necessary.

Important Technical Specifications:

Product Dimensions:
- Height: 79 cm
- Width: 46.5 cm
- Depth: 58.5 cm
Maximum Load Capacity: 120 kg
Assembly Time: Approximately 30 minutes (for one person)
Materials (Composition varies by item number):
- MONZA CHARCOAL (Item No. 313790): Face 100% Polyurethane, Base 65% Polyester, 35% Cotton
- OPULENT VELVET OCHRE (Item No. 918281): 100% polyester
- OPULENT VELVET BOTTLE GREEN (Item No. 914584): 100% polyester
- FAUX LEATHER TAN (Item No. 915671): Face 100% Polyurethane, Base 65% Polyester, 35% Cotton
- OPULENT VELVET STEEL (Item No. 648581): 100% polyester
Components:
- Seat (Ref 1): 46.5 x 41 cm (Qty 1)
- Backrest (Ref 2): 44 x 27.5 cm (Qty 1)
- Front Legs (Ref 3): 54 x 43.5 cm (Qty 1)
- Rear Legs (Ref 4): 54 x 43.5 cm (Qty 1)
- Left Support Bar (Ref 5): 55 x 23 cm (Qty 1)
- Right Support Bar (Ref 6): 55 x 23 cm (Qty 1)
Fixtures and Fittings (with extra fittings included for loss or damage):
- M6 x 35mm Screws (Ref A): Qty 4 (1 extra)
- M6 x 20mm Screws (Ref B): Qty 8 (1 extra)
- M8 x 14mm Screws (Ref C): Qty 2 (1 extra)
- 18mm Washers (Ref D): Qty 4 (1 extra)
- 5mm Allen Key (Ref E): Qty 1

Usage Features:

Assembly Process:
1. Colour Check: Before unpacking fully, verify the colour of the first component to ensure satisfaction.
2. Protective Packaging: Lay out all components on the protective packaging to prevent scratches during assembly.
3. Parts Check: Reference the "parts page" in the instructions to confirm all pieces are present.
4. Step 1 (Attaching Support Bars to Seat): Secure the left (Ref 5) and right (Ref 6) support bars to the underside of the seat (Ref 1) using M6 x 20mm screws (Ref B) and the 5mm Allen key (Ref E). Do not fully tighten at this stage (80% tightness recommended). Ensure the "FRONT" markings on the seat and support bars align.
5. Step 2 (Attaching Backrest to Seat): Secure the backrest (Ref 2) to the seat (Ref 1) using M6 x 20mm screws (Ref B) and the 5mm Allen key (Ref E). Ensure the "UP" marking on the backrest is correctly oriented. Once attached, fully tighten all fittings from Step 1 and Step 2.
6. Step 3 (Attaching Legs): Attach the front legs (Ref 3) and rear legs (Ref 4) to the underside of the seat frame using M8 x 14mm screws (Ref C) and the 5mm Allen key (Ref E). Do not fully tighten at this stage (80% tightness recommended).
7. Step 4 (Final Tightening of Legs): Ensure all fittings for the legs are fully tightened before proceeding.
8. Step 5 (Attaching Seat to Legs): Secure the assembled seat and backrest unit to the leg frame using M6 x 35mm screws (Ref A) and 18mm washers (Ref D) with the 5mm Allen key (Ref E). Fully tighten all fittings.
Safety Warnings:
- Retain instructions for future reference.
- Keep fittings out of children's reach and children away from the construction area.
- Use only on a firm, level ground.
- Periodically check and re-tighten all fittings.
- Avoid excessive heat or direct sunlight to prevent colour deterioration.
- Unwrap packaging carefully and place components on a clean surface or carton box to prevent damage.
Do's:
- Read the leaflet before starting.
- Ensure you have the right tools and ample space.
- Unwrap packaging and place components on a clean surface.
- Use packaging to protect surfaces during assembly.
- Carefully check all parts before assembly.
- Ensure the product is fully assembled and all fixings are tightened.
- Wipe occasionally with a soft, slightly dampened cloth, then buff with a dry, clean soft cloth.
Don'ts:
- Do not drag or pull the furniture.
- Do not use silicone-based furniture polish, as it can break down the finish.
- Never allow any liquid to remain on the furniture, as absorption can cause wood to warp or finishes to delaminate.
- Do not stand or lean back on the chairs.

Maintenance Features:

Cleaning: Wipe occasionally with a soft cloth slightly dampened with water, then buff with a dry, clean soft cloth.
Fittings Check: Periodically check all fittings and re-tighten as necessary to maintain stability and safety.
Returns Process (if not satisfied):
- Check all parts are present (using the 'parts page' as a checklist).
- Place all loose fittings and fixtures into the provided packaging or a plastic bag.
- Wrap all big components back into the original protective packaging.
- Close and securely seal the box (use plenty of tape).
- Do not leave anything assembled; all components must be dismantled and separately packed.
- Do not put loose fixtures and fittings directly into the box without separate packaging.
- Do not carelessly throw items back into the box, as they may get damaged.
- Contact Next customer service at 0333 777 8999 to arrange a pick-up time.
Missing or Damaged Parts: Contact customer service at 0333 777 8999 for free replacements.
Faulty Product:
- If within 28 days of purchase, a replacement, refund, or visit from a trained home service technician may be offered.
- If after 28 days, an independent home service technician will review and repair the product and recommend further action.
Contact Information:
- Phone: 0333 777 8999
- Address: Home Customer Services, Next Retail Ltd, Desford Road, Leicester, LE19 4AT

Next AUSTIN - Page 6

Related product manuals