Next HUXLEY 108487 - User Manual

To Next Page

We’re conﬁdent you’ll love your gorgeous new Next

furniture. However, it’s worth making absolutely certain

before you put it all together.

So, let’s quickly run through these three steps:

TIPS FOR RETURNS

Not completely happy with the product? No problem.

We just need everything back in the original packaging, so follow the steps below

and this will ensure a super-smooth returns process and no delay to your refund.

1. COLOUR

Make sure you’re happy with the colour

No need to unpack everything, just check the ﬁrst component.

2. PROTECTIVE PACKAGING

If you’re happy, then it’s time to get opening! Start by laying everything out

on the protective packaging – this will prevent anything getting scratched.

3. PARTS PAGE

Finally, double check you have all the pieces by referencing

the parts page of the instructions.

• Check everything is there (the ‘parts page’

is a handy checklist).

• Pop all the loose ﬁttings and ﬁxtures into

the packaging provided or tie them up in a

plastic bag.

• Wrap all the big components back

up in the original protective packaging.

• Close up the box and seal it securely

(don’t be afraid to use plenty of tape).

DO DON’T

• Leave anything assembled -

all components should be dismantled

and separately packed.

• Put loose ﬁxtures and ﬁttings straight

into the box.

• Throw it back in the box carelessly –

as it may get damaged.

Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.

BEFORE YOU GET

STARTED...

Main Page

Need help?

Do you have a question about the Next HUXLEY 108487 and is the answer not in the manual?

The device manual describes the "HUXLEY MIRROR," model number 108487, from Next Home. This document provides assembly instructions, safety warnings, and information regarding returns and customer service.

Function Description:

The Huxley Mirror is a decorative and functional item designed to be wall-mounted. Its primary function is to provide a reflective surface. The mirror is intended for indoor use, specifically not in bathrooms, and requires secure wall mounting for stability and safety. It is not designed to be freestanding.

Important Technical Specifications:

Model Name: HUXLEY MIRROR
Model Number: 108487
Actual Product Size: H54 x W75 x D13cm (Height 54cm, Width 75cm, Depth 13cm)
Date of Manufacture: 11/2016
Contract Number: IM8438205
Nominal Thickness of Glass: 5mm
Glass Type: Annealed glass
Country of Origin: China
Manufacturer: Produced in China for Next Retail Ltd. (Name and Address: NEXT RETAIL LTD. LE19 4AT)
Assembly Time: Approximately 15 minutes
People Required for Assembly: Two people are needed to lift the unit into position.
Tools Required (Not Supplied): Spirit level, PH2 screwdriver (or similar for tightening screws). Wall plugs and fixings are not included and must be sourced by the user based on their wall type.
Fixing Method: The mirror is designed to be hung by screwing a permanent screw into a secure wall, utilizing fixing clips attached to the mirror. A template (A) is provided to mark the wall for fixings.

Usage Features:

Wall Mounting: The mirror must be securely wall-mounted. It is crucial to use appropriate wall fixings for the specific wall type to ensure stability and safety. Professional installation is strongly recommended due to the mirror's weight.
Stability: Wall fixings are essential for stability; the mirror should not be left freestanding.
Placement: Avoid placing very hot or very cold items against or in close proximity to the glass surface.
Environment: Not suitable for use in bathrooms. Avoid exposing the furniture to excessive heat or direct sunlight, as this can cause deterioration of the colour.
Safety: Children should be kept away during assembly due to possible risk of injury. Always ensure the intended wall area for drilling is free from hidden electrical wires, water, and gas pipes. Periodically check all fittings and re-tighten as necessary. Do not sit or stand on the furniture.

Maintenance Features:

Cleaning: To clean, wipe with a sponge and warm soapy water. Do not use solvent-based cleaners or detergents, as they can bleach or damage the product. Avoid using washing powders or any substance containing abrasives. Do not strike the glass with hard or pointed items.
Glass Replacement: If a glass component is chipped or broken, it should be replaced with glass of the type described on the label (5mm, annealed glass). Users should consult with the retailer to obtain manufacturing specifications and shape for replacement glass, quoting the model number, batch number, and date of manufacture.
Periodic Checks: Periodically check the mirror to ensure that no fitting has loosened and needs attention. All fittings should be checked and re-tightened as necessary.
Returns Process: If not completely happy, the product must be returned in its original packaging. All components should be dismantled and separately packed. Loose fittings and fixtures should be placed in provided packaging or a plastic bag. Big components should be wrapped in original protective packaging. The box should be closed and securely sealed with plenty of tape. Assembled items cannot be returned. Loose fixtures and fittings should not be thrown straight into the box carelessly, as this may cause damage.
Customer Service: For missing or damaged parts, assembly instructions, or product faults, contact Next customer service at 0333 777 8999. For product faults within 28 days, a replacement, refund, or home service technician visit may be offered. For faults after 28 days, an independent home service technician will review and repair the product. Customer service can also be contacted by mail at Home Customer Services, Next Retail Ltd, Desford Road, Leicester, LE19 4AT.