Next MILANO 896267 - Step Eleven: Assemble Cabinet Sides; Step Twelve: Attach to Base; Step Thirteen: Insert Back Panels

1.Insert 4 x cambolts (E) into panels 7 & 24 and
tighten with a screwdriver.
2. Glue and insert 4 x big wooden dowels (A) into
panels 6 (x2).
3. Attach panels 7 & 24 to panels 6 (x2) .
Note :Pls note the gloss pvc foil must be faced
outside when assembling.
4. Insert 4 x camlocks (D) into panels 6 (x2) and
tighten with a screwdriver.
1. Glue and insert 8 x big wooden dowels (A) into
panel 9.
2. Attach the assembled frame to panel 9.
3. Insert 8 x camlocks (D) into panels 6 (x2), 7 & 24
and tighten with a screwdriver.
4. Please remove the protective film from the
outside surface of panels 6 (x2) & 7.
STEP ELEVEN
STEP TWELVE
9
1. Carefully turn up the assembled unit as shown.
2. Slide panels 10 & 22 into the back panel groove.
STEP THIRTEEN
3
1
2
Page 6 of 8