Next MILANO 896267 - Step Fourteen: Attach Top Section; Step Fifteen: Install Drawer Fittings; Step Sixteen: Insert Drawer Units

1. Insert 6 x cambolts (E) into panel 8 and
tighten with a screwdriver.
2. Glue and insert 6 x big wooden dowels (A) into
panels 3,1 & 2.
3. Attach panel 8 to the assembled unit.
4. Insert 6 x camlocks (D) into panels 3,1 & 2.
and tighten with a screwdriver.
1. Insert 8 x fittings (N) into the required position
of panels 3 & 1.
2. Insert panels 5 (x2) onto the fittings (N) .
3. Use 2 x stickers (F) to cover the camlock holes
on panel 3 .
STEP FOURTEEN
STEP FIFTEEN
E
E
E
3
1
2
N
F
1. Insert the drawer units to the assembled unit as
shown.
STEP SIXTEEN
19
12
13
N
N
3
1
5
5
Page 7 of 8