1.Secure 2 x fittings (M) to panel 23 with
4 x screws (J) as shown.
2. Please remove the protective film from the
outside surface of panel 23.
3.Attach door handles (O) to the panel 23 with
screws provided.
4.Insert panel 23 into the groove of the top
panel 8 as shown. Lift the door panel at an angle
and slot into the groove in panel 8, slide the
underneath towards panel 9 and locate the
rollers into the runner in panel 9.
1. Insert 12 x plastic fasteners (H) into the back panel
grooves and tighten with screws provided.
STEP SEVENTEEN
STEP EIGHTEEN
H
H
M
M
J
J
23
23
1. Using screw and washer secure the
2 x nylon straps (I) to the back of top panel.
2. Secure the other end of the strap to the wall
with an appropriate screw and wall plug
for your wall type (not provided).
To hide the strap behind the unit ,drill the hole
lower than the top of unit.
Warning:
Always ensure intended wall area to be
drilled is free from hidden electrical wires,
water and gas pipes.
NB:Wall fixings are not included-Please source
suitable fixing for your wall type. If in doubt
please consult a qualified trades person.
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP NINETEEN
H
H
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 8 of 8
To Previous Page
Loading...
