Nextar Q3 Software Manual

- 3 -
To start the system:
1 Press the POWER button. The screen appears.
2 Tap Navigate. A warning screen appears.
3 Tap “I Agree” after you have read and agreed to the
warning. The map view appears and you are ready to
set your first destination!
Getting a GPS signal
To use the system to guide you to a destination, the system’s GPS antenna must be
receiving signals. GPS signals can be obstructed by ceilings, trees, and nearby tall
buildings. Signals can also be obstructed by the roof of your vehicle. For best results,
position your system where it has a clear view of the sky.
You can quickly view the GPS Info screen by pressing the left side of the wheel button.

Nextar Q3 Specifications

General

Brand	Nextar
Model	Q3
Category	GPS
Language	English