ENG16
MOB IL E ENTERTAINMENT
BASIC OPERATIONS
1. Connect the included AC/DC adapter to a socket.
2. Connect the DC output plug of the adapter to the DC input jack on the unit.
3. Once the player is connected to the adapter or the backplate of Click & Go, the player
will automatically turn on.
Note:
The included AC/DC adapter is compatible with voltage from 100V to 240V. You can use
it overseas, and a converter plug may be used to fit into the region in which you are
traveling.
DVD
TURNING ON THE PLAYER BY USING THE ADAPTER
TURNING ON THE PLAYER BY USING THE BATTERY
1. The player also works without adapter if the battery is charged.
2. The built-in battery (7.4V/3200mAh) allows up to 2.5-hour use.
3. Press ON/ on the unit for about 2 seconds.
USB
DC I N12V
SD/MMC/MS
To Next Page
Need help?
General
