4. Replace the cover and adjust the direction of the spray.
5. Press and hold the Mist button to turn the unit on and
o.
6. Briey press the Mist button to choose the operation
time: 1H, 3H, 6H (H=hours), ON for continuous spray time
or OFF to cancel.
7. The mist intensity is adjusted by holding and pressing
the Mist button until a beep is heard. One beep will
produce the highest intensity, while two beeps will set the
intensity to its lowest level.
8. Press the Light button to turn the LED on. The brightness
level is adjusted by pressing the Light button several times
to cycle through the available settings (running eect,
bright color, soft color or o ).
9. The unit will stop misting and the light will turn o
automatically when water level becomes too low.
To Next Page
Loading...
Need help?
General