© National Instruments Corp. 3 NI 9269 Operating Instructions and Specifications
Safety Guidelines
Operate the NI 9269 only as described in these operating
instructions.
Hot Surface This icon denotes that the component may be
hot. Touching this component may result in bodily injury.
Safety Guidelines for Hazardous Voltages
If hazardous voltages are connected to the module, take the
following precautions. A hazardous voltage is a voltage greater
than 42.4 V
pk
or 60 VDC to earth ground.
Caution Ensure that hazardous voltage wiring is
performed only by qu alified personnel adhering to local
electrical standards.
Caution Do not mix hazardous voltage circuits and
human-accessible circuits on the same module.
Caution Make sure that devices and circuits connected to
the module are properly insulated from human contact.
To Next Page
Loading...
