NI sbRIO-9637 User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

NI sbRIO-9637 Specifications

General

Brand	NI
Model	sbRIO-9637
Category	Controller
Language	English

Summary

Mechanical Considerations

Dimensions

Specifies the physical dimensions of the sbRIO-9637.

Maximum Component Heights

Mounting

Mounting Direction Options

Discusses different orientations for mounting the device.

Mounting on a Panel or Plate with Conduction Path

Mounting on a Panel or Plate with Convection Path

Chassis Grounding Connections

Managing Thermal Conditions

Designing a Suitable Enclosure

Details designing an enclosure for thermal requirements.

Understanding Thermal Specifications

Validating the System

Validating Temperature Measurements Digitally

Explains digital methods for validating thermal performance.

Managing Power and Feature Utilization

Mounting Recommendations for Maximizing Thermal Performance

Provides advice for optimizing thermal performance through mounting.

Designing A Thermal Solution

Additional Resources for Managing Thermal Conditions

Shock and Vibration

Ports and Connectors

Connector Descriptions

Details the specifications of each connector on the device.

Power and Ethernet Ports

Covers Power Connector and RJ-45 Gigabit Ethernet Port details.

RS-232 Serial Ports

Details the two RS-232 serial ports.

RS-485 Serial Port

Details the RS-485 serial port.

CAN Port

Details the CAN port.

DIO and MIO Ports

Describes the DIO and MIO ports for input and output configurations.

USB Host Ports

Information about the USB host ports.

SD Connector

Details the SD card connector.

System Reset and LEDs

RESET Button and System Reset Behavior

Describes the reset button function and system reset modes.

LED Indicators

Details the POWER, STATUS, USER, and Ethernet LEDs.

Real-Time Clock (RTC) and Digital I/O

Real-Time Clock (RTC) Battery

Information about the RTC battery.

Internal Real-Time Clock (RTC)

Explains the internal system clock functionality.

Integrated 3.3 V Digital I/O

Details the 3.3 V digital I/O capabilities.

Analog Input

Integrated Analog Input

Details the analog input channels.

Analog Input Range

Explains the selectable input ranges for analog inputs.

Working Voltage Range

Defines the acceptable working voltage ranges for analog inputs.

Best Practices for Scanning Multiple Channels

Guidelines for accurate multi-channel analog scanning.

Differential Measurement Configurations

Describes differential measurement setups for analog inputs.

Connecting Analog Input Signals

Summarizes recommended input configurations for analog signals.

Analog Output

Integrated Analog Output

Details the four 16-bit analog output channels.

Analog Output Startup and Initialization

Explains how analog outputs are initialized.

Power Requirements

Wiring the Power Supply Connector

Instructions for wiring the power supply connector.

Powering On the NI sbRIO Device

Describes the power-on sequence and POST.

Calculating the Power Requirement

Provides formulas for calculating total power consumption.

Configuring the sbRIO-9637

Connecting to the Host Computer

Steps to connect the device to a host computer via Ethernet.

Network Configuration (DHCP and Static IP)

How to locate the device using DHCP or static IP addresses.

Configuring Startup Options

How to configure device startup behavior.

Configuring FPGA Startup App

How to select an FPGA startup application.

CAN Network Connections

CAN Bus Topology and Termination

Explains CAN bus topology and termination requirements.

Termination Resistors and Cable Lengths

Specifies requirements for CAN termination resistors and cable lengths.

File System

Worldwide Support and Services