NI cRIO-9048 User Manual

GETTING STARTED GUIDE
cRIO-904x
Embedded CompactRIO Controller with Real-Time Processor and
Reconfigurable FPGA
This document describes how to begin using the cRIO-904x.
In this document, the cRIO-9040, cRIO-9041, cRIO-9042, cRIO-9043, cRIO-9045,
cRIO-9046, cRIO-9047, cRIO-9048, and cRIO-9049 are referred to collectively as cRIO-904x.
Note Refer to the device Safety, Environmental, and Regulatory Information
document, shipped with your cRIO-904x controller and available on ni.com/
manuals, for important safety and environmental specifications necessary when
setting up your device.
Unpacking the Kit
Notice To prevent electrostatic discharge (ESD) from damaging the device, ground
yourself using a grounding strap or by holding a grounded object, such as your
computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Notice Never touch the exposed pins of connectors.
Note Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.

NI cRIO-9048 Specifications

General

Operating System	NI Linux Real-Time
Chassis Slots	8
Ethernet Ports	2
USB Ports	2 x USB 3.0
Power Supply	9 VDC to 30 VDC
Serial Port	1 x RS-232
Operating Temperature	-20 °C to 55 °C
Processor	Intel Atom E3845 1.91 GHz quad-core
Memory (RAM)	4 GB DDR3L-1333 DRAM
Storage	32 GB SSD

Summary

cRIO-904x Getting Started Guide

Unpacking the cRIO-904x Kit

Host Computer Software Installation

Software and Driver Installation Steps

Details on installing the required application software and device drivers on the host.

Installing the C Series Modules

Grounding the cRIO-904x Controller

Procedure to connect the controller's grounding terminal to the facility's system.

Powering the cRIO-904x Controller

Connecting the cRIO-904x to the Host Computer via USB

Discovering cRIO-904x in Measurement & Automation Explorer (MAX)

Setting a System Password on cRIO-904x

Installing Software on the cRIO-904x Controller

Detailed steps for installing software directly onto the cRIO-904x controller.

Troubleshooting the Controller