NI cRIO-904 Series User Manual

GETTING STARTED GUIDE
cRIO-904x
Embedded CompactRIO Controller with Real-Time Processor and
Reconfigurable FPGA
This document describes how to begin using the cRIO-904x.
In this document, the cRIO-9040, cRIO-9041, cRIO-9042, cRIO-9043, cRIO-9045,
cRIO-9046, cRIO-9047, cRIO-9048, and cRIO-9049 are referred to collectively as cRIO-904x.
Note Refer to the device Safety, Environmental, and Regulatory Information
document, shipped with your cRIO-904x controller and available on ni.com/
manuals, for important safety and environmental specifications necessary when
setting up your device.
Unpacking the Kit
Notice To prevent electrostatic discharge (ESD) from damaging the device, ground
yourself using a grounding strap or by holding a grounded object, such as your
computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Notice Never touch the exposed pins of connectors.
Note Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.

NI cRIO-904 Series Specifications

General

Brand	NI
Model	cRIO-904 Series
Category	Controller
Language	English

Summary

Unpacking the Kit

What You Need to Get Started

Installing Software on the Host Computer

Guides users through installing necessary NI software and device drivers on their host computer.

Installing the C Series Modules

Connecting the cRIO-904x

Connecting the Controller to Ground

Connecting the Controller to Power

Connecting the Controller to the Host Computer

Discovering the Controller in MAX

Setting a System Password

Installing Software on the Controller

Testing Your Controller in MAX

Changing Module Programming Modes in MAX

Troubleshooting the Controller

The cRIO-904x is Not Communicating with the Network

Helps diagnose and resolve issues related to network connectivity problems with the cRIO-904x controller.

Verify the System IP Configuration

Guides users on checking and confirming the IP address and network settings of the cRIO-904x controller.

Configure the Windows Firewall

Details steps to configure the Windows Firewall to allow necessary communication for MAX and the cRIO-904x.

System Reset

Explains the different behaviors of the cRIO-904x controller when using the system reset button.

STATUS LED Indicators

Using the cRIO-904x in LabVIEW

Adding the cRIO-904x to a LabVIEW Project

Guides users on creating a new LabVIEW project and adding the cRIO-904x controller as a target.

Adding the cRIO-904x to a LabVIEW FPGA Project

Where to Go Next

Worldwide Support and Services