Sub-Head
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
9
www.nibco.com
AHEAD OF THE FLOW
®
NIBCO’s 5-Step Method for a Great Stainless Steel Sleeve Connection
Our NIBCO sleeve connection system is fast, easy and leaves a great looking connection. Simply slide the sleeve over the end of the
pipe, push in the fitting, and crimp the sleeve with our special sleeve tool. Because the sleeve has a positive stop, there is no need to
worry about it sliding around on the pipe. The view hole on the side of the sleeve helps guarantee that the sleeve is properly inserted.
Step 1
Cut the pipe to length squarely. A rough, jagged or irregular cut may result in a failed connection.
Step 2
Slide the correct sized stainless steel sleeve over the end of the NIBCO
®
PEX pipe until it bottoms out. Look at the view hole on the side
to see if it is over the pipe.
To Next Page
Loading...
Need help?
General