Nibe AG-AA10 Series - Installation Guide; Compatible Unit Combinations; Outdoor Unit Mounting Instructions

Model combinations
See product catalogue for further information about
model combinations.
Indoor unitOutdoor unit
AG-WT10-4AG-AA10-30
AG-WT10-4AG-AA10-40
AG-WT10-7AG-AA10-50
Installation instructions
1.
Place the outdoor unit on a stable base raised
above the ground and secure it.
TIP
When installing stand, install screws
downward to facilitate removal of the
front panel.
400 mm
300 mm
100 mm
2.
Hole for connecting the accessory AG-CH10.
7Chapter 5 | InstallationAG-AA10
5 Installation