MENU 7.1.4.4 - DEMAND-CONTROLLED
VENTILATION
Humidity controlled ventilation
Alternative: on/off
CO2 controlled ventilation
Alternative: on/off
Highest fan speed
Setting range: 1 – 100%
Lowest fan speed
Setting range: 1 – 100%
Time interv. change of fan speed
Setting range: 1 – 60 minutes
Controlling zones
Activate zones for demand-controlled ventilation.
Here, you make settings for demand-controlled ventila-
tion.
The speed of the fan can be changed depending on the
humidity in the air.
The speed of the fan can be changed depending on the
carbon dioxide content in the air.
MENU 7.1.6.4 - LIMIT RH IN HEAT
Here you can activate Humidity control, controlled by
the relative humidity (RH) of the air, during heating oper-
ation. Only shown if a moisture sensor is installed
MENU 7.1.7.2 - HUMIDITY CONTROL
Only shown if a moisture sensor is installed and cooling
is activated.
Prevent condensation in cold
Setting range: on/off
Limit RH in cold
Setting range: on/off
Prevent condensation in cold: With the function activ-
ated, condensation in the pipes is prevented.
Limit RH in cold: With the function activated, the tem-
perature is regulated to achieve the desired relative hu-
midity (RH).
17CDS 10 | GB
To Next Page
Loading...
