To Next PageTo Next Page
Need help?Do you have a question about the Nibe CDS 10 and is the answer not in the manual?
General| Brand | Nibe |
|---|---|
| Model | CDS 10 |
| Category | Temperature Controller |
| Language | English |
Guidance on appliance usage by children and persons with reduced capabilities, and general safety rules.
Explanation of symbols that may be present on the product's label(s).
Explanation of symbols that may be present in this manual.
Measures the temperature in the zone where the CDS 10 is placed.
Limits relative humidity (RH) during heating and cooling operations.
Manages CO2 levels by adjusting fresh air intake.
Adjusts ventilation based on indoor climate requirements.
Illustrates how climate systems are divided into zones with sensors.
Steps to pair the wireless CDS 10 sensor with the main product.
Explanation of the LED status lights on the CDS 10 sensor.
Troubleshooting and network connection status for the CDS 10.
Information on using a repeater to amplify wireless signals.
Guidance on where and how to install the CDS 10 sensor for optimal measurement.
Warning against installing the CDS 10 sensor outdoors.
Configure temperature settings for heating and cooling operations.
Set the desired relative humidity level for the zone.
Assign sensors to zones and configure sensor control settings.
Connect and manage wireless units like the CDS 10 sensor.
Configure ventilation based on humidity and CO2 levels.
Details on part number and dimensions of the CDS 10 sensor.
Contact information for NIBE Energy Systems in various countries.
