Mounting
Install CDS 10 in a suitable location approx. 1.5 m above the
floor. It is important that CDS 10 is not prevented from
measuring the correct humidity, room temperature and CO
2
,
for example by being placed in a recess, between shelves,
behind a curtain, above or close to a heat source, in a
draught from an outer door or in direct sunlight.
1. Fit the wall mount to the wall.
2. Insert the batteries.
3. Fit CDS 10 on the wall mount.
NOTE
CDS 10 must not be installed outdoors.
15CDS 10 | EN
To Next Page
Loading...
