Need help?Do you have a question about the Nibe ES Series and is the answer not in the manual?
General| Protection Class | IP21 |
|---|---|
| Series | ES |
| Type | Electric |
| Voltage | 230/400 V |
| Control | Electronic |
| Category | Electric Boiler |
| Weight | Varies by model (approximately 25-40 kg) |
Details the physical layout and measurements of the water heater's parts.
Lists all parts included with the water heater for installation and operation.
Details the process of assembling the water heater unit.
Describes the requirements for connecting pipes according to norms and directives.
Outlines safety requirements and procedures for electrical connections by qualified personnel.
Explains how to set the output selector for the 6 kW immersion heater.
Provides guidance on setting the thermostat for optimal operating conditions.
Details how to check and maintain the safety valve for proper function.
Provides instructions on how to safely drain the water heater.
Offers guidance on troubleshooting common issues and malfunctions.
Explains the procedure to reset the temperature limiter if it trips.
Instructions for reconnecting sensors for the thermostat and temperature limiter.
Information on contacting service personnel and providing necessary details.
Presents detailed technical data for different ES models including output, heating times, and dimensions.
Lists the components included in the kit for specific ES models.
To Next Page
