Nibe F1145 - Page 38

cooling settings (accessory required)
cooling1.9.5
cooling flow temp. at +20°C
cooling flow temp. at +40°C
use system 2 in cool mode
min. temp. cooling flow
°C
°C
°C
min. temp. cooling flow
Setting range: 5 - 30 °C
Default value: 17
cooling flow temp. at +20°C
Setting range: 5 - 30 °C
Default value: 20
cooling flow temp. at +40°C
Setting range: 5 - 30 °C
Default value: 20
set pt value cool/heat sensor
Setting range: 5 - 40 °C
Default value: 21
heat at room under temp.
Setting range: 0.5 - 10.0 °C
Default value: 1.0
cool at room over temp.
Setting range: 0.5 - 10.0 °C
Default value: 1.0
Menu
1.9.5
NIBE™ F1145Chapter 3 | F1145 – at your service36