Summary of general standard settings for heating
o Set the heatpump temperature to a level you find comfortable
o Leave radiator thermostatic valves set on 3-4
o Set the heating for the appropriate season
o Do not open windows to clear condensation when bathing or cooking.
Adequate thermal comfort should automatically be delivered in your home at these settings.
Summary of NIBE Alarms
Recommendations on electrical tariff and payment method
It is recommended that if possible you pay for your electricity by regular direct debit payments direct to your
energy supplier. This method of payment will allow you to spread the costs of your heating bills more
evenly throughout the year and offers the cheapest cost of electricity per unit (kWh). Pre payment meters
will charge more per unit of electricity used resulting in your heating costing you more to run.
While different tariffs will be available from your electricity supplier such as Economy 7 or 10 type, we
suggest that a standard tariff will be the most appropriate starting point. The choice of electrical supplier,
payment method and tariff is of course entirely your choice and should be selected to best suit your lifestyle
and reviewed thereafter.
Remember when reviewing the annual running costs of your heating to take into account that you do not
have any gas bills to pay.
Thank you for taking the time to read this information sheet. Now file it with your residents pack for future
reference.
In the event of an alarm, some kind of malfunction has
occurred, which is indicated by the status lamp changing
from green continuously to red continuously.
In addition, an alarm bell appears in the information
window.
Alarm
In the event of an alarm with a red status lamp a
malfunction has occurred that the heat pump cannot
remedy itself. In the display, by turning the control knob
and pressing the OK button, you can see the type of
alarm it is and reset it. You can also choose to set the
heat pump to aid mode.
info / action Here you can read what the alarm means
and receive tips on what you can do to correct the
problem that caused the alarm.
To Previous Page
Loading...
