Need help?Do you have a question about the Nibe F2025 and is the answer not in the manual?
Important safety instructions for using the heat pump, including warnings for children and proper use.
Explains how the F2025 air/water heat pump functions as a heating source.
Instructions for correctly positioning and mounting the F2025 heat pump outdoors.
Details the internal electronic controller and its functions for heat pump operations.
Diagram and explanation for connecting F2025 with the VVM 300 control unit.
Diagram and explanation for connecting F2025 with the EVP 270 module.
Diagram and explanation for connecting F2025 with the EVP 500 module.
System diagram for F2025 integrated with an oil/pellet boiler and SMO 10.
Configuration for multiple F2025 units connected with SMO 10 for advanced heating.
System diagram for F2025 controlled by a room thermostat via EVC 13.
Integration of F2025 with an electric or oil boiler for heating system support.
System diagram for F2025 with a wood-fired boiler and hot water heater.
Details on connecting the heat pump, including circuit breaker requirements and insulation testing.
Connecting and controlling additional heat and downtime functions via relays.
Step-by-step guide for starting up the F2025 and performing initial inspections.
Guidance on adjusting temperature difference (AT) for optimal charge flow.
Detailed wiring diagram for the 3x400V 8-10 kW F2025 model.
Detailed wiring diagram for the 3x400V 14 kW F2025 model.
Troubleshooting guide for identifying and resolving issues when the F2025 is not operating.
To Next Page
General
