Nibe SAM 40 - Maintenance of SAM 40

Maintenance of SAM 40
Regular checks
Your supply air module requires minimal maintenance after commissioning.
On the other hand, it is recommended that you check your installation
regularly.
If something unusual occurs, messages about the malfunction, in the form
of different alarm texts, appear in the heat pump display.
Cleaning the ventilation devices
The building’s ventilation devices should be
cleaned regularly with, for example, a small
brush to maintain the correct ventilation.
The device settings must not be changed.
NOTE
If you take down more than one ventilation
device for cleaning, do not mix them up.
NIBE SAM 40Chapter 2 | The heating installation – the heart of the
house
10