Need help?Do you have a question about the Nibe SMO 20 and is the answer not in the manual?
General| Type | Control Unit |
|---|---|
| Compatibility | NIBE heat pumps |
| Display | LCD |
| Power Supply | 230 V AC |
| Power Consumption | 5 W |
| Protection Class | IP20 |
| Communication | Modbus |
| Operating Temperature | 0 to 40 °C |
Explains control buttons and menu interaction.
Guide to adjusting room temperature.
Fields for recording installation specifics.
Emphasizes the need for the serial number.
User age, supervision, and modifications.
Explains icons indicating danger or caution.
Details product compliance and protection ratings.
Explains where to find the product's unique identifier.
Lists contact details for various countries.
Highlights the ease of reading and understanding the display.
Explains the SMO 20's role in the system.
Introduces the front panel display and its components.
What is shown on the screen.
Functions of OK, Back, and Control Knob.
On, Standby, and Emergency modes.
Location and purpose of the USB port.
Settings for room temperature and schedules.
Settings for hot water production.
Interpretation of icons seen on the display.
How to move between menu options.
Process for changing numeric parameters.
How to enter text using the on-screen keyboard.
How to get assistance within menus.
Recommended routine inspections.
Advice for reducing consumption.
Detailed explanation of temperature adjustments.
Control when sensors are used.
Configuring time-based heating.
Setting time-based cooling.
Adjusting performance curves.
Explains how curves affect performance.
Setting maximum and minimum flow temperatures.
Adjusting based on external contacts.
Defining the lowest flow temperature.
Adjusting sensor impact on temperature.
Thresholds for cooling operation.
User-defined performance curves.
Setting a reference outdoor temp.
Temporarily increasing hot water temperature.
Descriptions of comfort levels for hot water.
Configuring time-based hot water.
Settings to prevent bacterial growth.
Settings for pump run times.
General system status.
Viewing past alarms.
Compressor operating statistics.
Specifics of recorded alarms.
How to interpret historical data.
Connecting the unit to the internet.
Managing remote access and users.
Configuring network parameters.
Configuring proxy server access.
How SG Ready impacts room temperature.
Determining electricity price influence.
Connecting to smart home systems via NIBE Uplink.
Automatic function selection.
User-defined function selection.
Configuring vacation period settings.
Setting priorities for heating/hot water.
Setting start/stop points for functions.
Heating demand calculation parameters.
Restoring default settings.
Scheduling when features are disabled.
Scheduling quiet operation for the compressor.
Overview of alarm handling.
Understanding and responding to alarms.
Initial checks for common issues.
Diagnosing and fixing hot water problems.
Troubleshooting compressor non-start.
How to enable this specific mode.
Points to detailed specifications.
Explanation of additional heat.
Explanation of climate system.
Definition of comfort disturbances.
Alphabetical listing for quick reference.
To Next Page
