Nibe SMO 20 - Schedule Silent Mode; Compressor Quiet Mode Scheduling

Caution
Long term blocking can cause reduced comfort and operating economy.
schedule silent mode
The compressor can be scheduled to be set to "quiet mode" (the heat
pump must support this) for up to two different time periods here.
Menu
4.9.6
When scheduling is active the "quiet mode" symbol is shown in the main
menu on the symbol for the control module.
activated
schedule 2schedule 1
all
mon
tues
wed
thur
fri
sat
sun
schedule silent mode 4.9.6
Time periodDay
Activated
Schedule
Conflict
Schedule: The period to be changed is selected here.
Activated: Scheduling for the selected period is activated here. Set times
are not affected at deactivation.
Day: Select which day or days of the week the schedule is to apply to here.
To remove the scheduling for a particular day, the time for that day must
be reset by setting the start time to the same as the stop time. If the line
"all" is used, all days in the period are set for these times.
Time period: The start and stop time for the selected day for scheduling
are selected here.
Conflict: If two settings conflict with each other a red exclamation mark
is displayed.
61NIBE™ SMO 20Chapter 3 | SMO 20 – at your service