For the menu INDOOR CLIMATE
there are several sub-menus. Status
information for the relevant menu can
be found on the display to the right
of the menus.
temperature Setting the temperature
for the climate system. The status in-
formation shows the set values for the
climate system.
scheduling Scheduling heating and
cooling. Status information "set" is
displayed if you set a schedule but it is not active now, "holiday setting"
is displayed if the vacation schedule is active at the same time as the
schedule (the vacation function is prioritised), "active" displays if any part
of the schedule is active, otherwise it displays " off".
advanced Setting of heat curve, adjusting with external contact, minimum
value for supply temperature, room sensor and cooling function.
NIBE™ SMO 20Chapter 3 | SMO 20 – at your service22
To Next Page
Loading...
