For the menu INFO there are several
sub-menus. No settings can be made
in these menus, they just display in-
formation. Status information for the
relevant menu can be found on the
display to the right of the menus.
service info shows temperature levels
and settings in the installation.
compressor info shows operating
times, number of starts etc for the
compressor in the heat pump.
add. heat info displays information about the additional heat's operating
times etc.
alarm log shows the latest alarms.
indoor temp. log the average temperature indoors week by week during
the past year.
NIBE™ SMO 20Chapter 3 | SMO 20 – at your service44
To Next Page
Loading...
