Nibe SMO 20 - Adjusting the Heat Pump; Internet Connectivity Setup

Adjust the heat pump
Overview
Sub-menus
op. mode
HEAT PUMP 4
my icons
time & date
language/ language
off
auto
plus functions
holiday setting
svenska
For the menu MY SYSTEM there are
several sub-menus. Status information
for the relevant menu can be found
on the display to the right of the
menus.
plus functions Settings applying to
any installed extra functions in the
heating system.
op. mode Activation of manual or
automatic operating mode. The status
information shows the selected oper-
ating mode.
my icons Settings regarding which icons in the control module's user in-
terface that are to appear on the hatch when the door is closed.
time & date Setting current time and date.
language Select the language for the display here. The status information
shows the selected language.
holiday setting Vacation scheduling heating and hot water comfort.
Status information "set" is displayed if you set a vacation schedule but it
is not active at the moment, "active" is displayed if any part of the vacation
schedule is active, otherwise it displays " off".
advanced Settings of control module work mode.
plus functions
Settings for any additional functions installed in SMO 20 can be made in
the sub menus.
Menu
4.1
internet
nibe uplink
internet4.1.3
tcp/ip settings
proxy settings
Here you make settings for connecting
SMO 20 to the internet.
Menu
4.1.3
NOTE
For these functions to work the
network cable must be connected.
NIBE™ SMO 20Chapter 3 | SMO 20 – at your service48