Nibe SMO 20 - Heating and Cooling Curves; Understanding Curve Coefficients

curve
heating curve
heating curve 1.9.1.1
system
outdoor temp. °C
flow temperature °C
Setting range: 0 – 15
Default value: 9
cooling curve (accessory
required)
cooling curve 1.9.1.2
system
outdoor temp. °C
flow temperature °C
Setting range: 0 – 9
Default value: 0
Menu
1.9.1
The prescribed heating curve for your house can be viewed in the
menu heating curve . The task of the heating curve is to give an even indoor
temperature, regardless of the outdoor temperature, and thereby energy
efficient operation. It is from this heating curve that the control module's
control computer determines the temperature of the water to the heating
system, supply temperature, and therefore the indoor temperature. Select
29NIBE™ SMO 20Chapter 3 | SMO 20 – at your service