Nibe SMO 20 - Advanced Settings Overview; Heating;Cooling Curves

TIP
Set the stop time earlier than the start time so that the period extends
beyond midnight. Scheduling then stops at the set stop time the day
after.
Scheduling always starts on the date that the start time is set for.
advanced
advanced 1.9
curve
external adjustment
min. flow line temp.
room sensor settings
cooling settings
own curve
Menu advanced is intended for the
advanced user. This menu has several
sub-menus.
curve Setting the curve slope for
heating and cooling.
external adjustment Setting the heat
curve offset when the external contact
is connected.
min. flow line temp. Setting minim-
um permitted flow line temperature.
Menu
1.9
room sensor settings Settings regarding the room sensor.
cooling settings Settings for cooling.
own curve Setting own curve for heating and cooling.
point offset Setting the offset of the heating curve or cooling curve at a
specific outdoor temperature.
NIBE™ SMO 20Chapter 3 | SMO 20 – at your service28