Nibe SMO 20 - Advanced Hot Water Settings; Periodic Hot Water Increase

advanced
advanced 2.9
periodic increase
hot water recirc.
Menu advanced has orange text and
is intended for the advanced user. This
menu has several sub-menus.
Menu
2.9
periodic increase
periodic increase 2.9.1
activated
period
start time
Next periodic increase
days
period
Setting range: 1 - 90 days
Default value: 14 days
start time
Setting range: 00:00 - 23:00
Default value: 00:00
Menu
2.9.1
To prevent bacterial growth in the water heater, the heat pump and any
additional heater can increase the hot water temperature for a short time
at regular intervals.
The length of time between increases can be selected here. The time can
be set between 1 and 90 days. Factory setting is 14 days. Tick/untick "ac-
tivated" to start/switch off the function.
NIBE™ SMO 20Chapter 3 | SMO 20 – at your service42