Need help?Do you have a question about the Nibe SCA 30 and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Model | SCA 30 |
| Brand | Nibe |
| Cooling capacity | 3.0 kW |
| Power supply | 230V |
English language installer manual for the SCA 30 docking kit.
Description of the SCA 30 accessory and its intended use for solar integration.
List of all components included in the SCA 30 docking kit.
Diagram illustrating the physical locations of components within the SCA 30 system.
Detailed descriptions of electrical components such as circuit breakers, terminal blocks, and switches.
Instructions for pipe routing, emphasizing the use of 22mm copper pipes and avoiding tight bends.
Step-by-step guide for installing the pipes, including insulation and cover disc placement.
Definitions and explanations of components within the system diagram.
Details on how solar heating is transferred and utilized by the VVM 500 system.
Schematic overview of the system's configuration and connections.
Guide for connecting the power supply to the terminal block X1.
Instructions for connecting the accessory card (AA5) for communication.
Procedure for installing temperature sensors, including paste application and cable ties.
Specific connection points for pool (BT51) and solar panel (BT53) sensors.
Wiring instructions for solar circulation pump (GP4) and pool cooling circulation pump (GP14).
Connecting the relay for solar panel cooling to prevent overheating.
Guidance on setting the DIP switch on the accessory card for optimal operation.
Procedures for activating the SCA 30 via the start guide or menu system.
Accessing and configuring accessory activation/deactivation through the menu system.
To Next Page