Nibe SCA 30 - Activation and Settings; SCA 30 Activation Methods; Menu System Settings

Activating SCA 30
Activating SCA 30 can be performed via the start guide
or directly in the menu system.
Start guide
The start guide appears upon first start-up after heat
pump installation, but is also found in menu 5.7.
Menu system
If you do not activate SCA 30 via the start guide, this can
be done in the menu system.
Menu 5.2 - system settings
Activating/deactivating of accessories.
Caution
Also see the Installer manual for VVM 500.
18
GB