Nibe SMO 20 - Contact Information; NIBE Regional Contacts

USER GUIDE
7
evoecohomes.co.uk
ScheduleSchedule: You can set two dierent schedules.
ActivatedActivated: a green tick in the white circle indicates the schedule is
activated.
DayDay: Set on and o times for each day. If you do not want a timer to run
for any given day, make sure your start and end times are the same. e.g.
00:00 - 00:00
*Tip*: if you wish to set similar scheduling for each day of the week, start
by lling in ‘all’ (found above ‘mon’ in the diagram) and then making any
desired changes for each day accordingly.
AdjustingAdjusting: set the hot water comfort level to be applied during your
scheduling e.g. smart control / economy / normal / luxury. This will appear
next to the time period.
ConictConict: a red exclamation mark will appear if you select times which
conict with each other, e.g. selecting an end time that occurs before the
start time, such as 01:00 - 00:15.
Disruptions to Comfort & Troubleshooting
If there are disruptions to comfort levels in heating or hot water, there are
some steps you can take that may resolve the issue without needing to
contact us.
If you require more hot water, please follow steps on p4 to activate
‘temporary lux’. Instructions for adjusting heating temperature are on p3.
Usually, the control module will note a malfunction and will indicate this
with alarms and show instructions of how to rectify it in the display.
Alarm Reset
In the event of an alarm with a red status lamp, a malfunction has
occured that the heatpump/module cannot remedy itself.