Mounting
Install THS 10 in a suitable location approx. 1.5 m above the
floor. It is important that THS 10 is not prevented from
measuring the correct humidity and room temperature, for
example by being placed in a recess, between shelves, be-
hind a curtain, above or close to a heat source, in a draught
from an external door or in direct sunlight.
1. Fit the wall mount to the wall.
2. Insert the batteries.
3. Fit THS 10 on the wall mount.
NOTE
THS 10 must not be installed outdoors.
15THS 10 | EN
To Next Page
Loading...
