Nibe VPB Series - Installation and System Connections

Installation
Removing the covers
Front cover
1
2
LEK
LEK
1.
Remove the screws from the lower edge of the front
cover.
2.
Lift the cover out at the bottom edge and up.
Side panels
LEK
LEK
LEK
1.
Remove the screws from the upper and lower edges.
2.
Twist the cover slightly outward.
3.
Move the hatch backwards and slightly to the side.
4.
Pull the cover to one side.
5.
Pull the hatch forwards.
11Chapter 3 | For the InstallerVPB/VPBS