PLUS FUNCTIONS
plus functions4.1
pool
internet
sms
smart price adaption
Settings for any additional functions in-
stalled in VVM 225 can be made in the
sub menus.
Menu
4.1
POOL (ACCESSORY IS REQUIRED)
pool4.1.1
activated
start temp
stop temperature
°C
°C
start temp
Setting range: 5.0 - 80.0 °C
Default value: 22.0 °C
stop temperature
Setting range: 5.0 - 80.0 °C
Default value: 24.0 °C
Menu
4.1.1
Select whether the pool control is to be activated and within what temperatures
(start and stop temperature) pool heating must occur.
When the pool temperature drops below the set start temperature and there is
no hot water or heating requirement, VVM 225 starts pool heating.
Untick "activated" to switch off the pool heating.
Caution
The start temperature cannot be set to a value that is higher than the
stop temperature.
INTERNET
Menu
4.1.3
57Chapter 3 | VVM 225 – at your serviceNIBE VVM 225
To Next Page
Loading...
Need help?
General
