comfort mode
HFRQRP\
FRPIRUW PRGH
QRUPDO
OX[XU\
Setting range: economy, normal, luxury
Default value: normal
Menu
2.2
The difference between the selectable modes is the temperature of the hot
tap water. Higher temperature means that the hot water lasts longer.
economy: This mode gives less hot water than the other, but is more eco-
nomical. This mode can be used in smaller households with a small hot water
requirement.
normal: Normal mode gives a larger amount of hot water and is suitable for
most households.
luxury: Lux mode gives the greatest possible amount of hot water. In this
mode, the immersion heater, as well as the compressor, is used to heat hot
water, which may increase operating costs.
scheduling
What hot water comfort the indoor module is to work with can be scheduled
here for up to two different time periods per day.
Menu
2.3
Scheduling is activated/deactivated by ticking/unticking"activated". Set times
are not affected at deactivation.
If two settings conflict with each other a red exclamation mark is displayed.
NIBE™ VVM 500Chapter 3 | VVM 500 – at your service40
To Next Page
Loading...
