indoor temp. log
Here you can see the average temperature indoors week by week during the
past year. The dotted line indicates the annual average temperature.
The average outdoor temperature is only shown if a room temperature
sensor/room unit is installed.
To read off an average temperature
1.
Turn the control knob so that the ring on the shaft with the week number
is marked.
2.
Press the OK button.
3.
Follow the grey line up to the graph and out to the left to read off the
average indoor temperature at the selected week.
4.
You can now select to take read outs for different weeks by turning the
control knob to the right or left and read off the average temperature.
5.
Press the OK or Back button to exit read off mode.
Menu
3.5
45NIBE™ VVM 500Chapter 3 | VVM 500 – at your service
To Next Page
Loading...
