VVM 500 - An excellent choice
VVM 500 is part of a new generation of products, which have been introduced
to supply your home with inexpensive and environmentally friendly heating.
Heat production is reliable and economical with integrated hot water coil,
immersion heater, circulation pumps, solar coil and control system.
The indoor module can be connected to an optional low temperature heat
distribution system, e.g. radiators, convectors or underfloor heating. It is also
prepared for connection to a number of different products and accessories,
e.g. solar or other external heat source, extra water heater, swimming pool
and climate systems with different temperatures.
VVM 500 is equipped with a control computer for good comfort, good eco-
nomy and safe operation. Clear information about status, operating time and
all temperatures in the system is shown on the large and easy to read display.
This means, for example, that external unit thermometers are not necessary.
Excellent properties for VVM 500:
႑
Coil for hot water
There is a stainless steel hot water coil integrated in the indoor module.
The water in the coil is heated by the hot water in the surrounding tank.
႑
Buffer vessel
There is a buffer vessel integrated in the indoor module that equalises the
temperature of the water that is sent out in the climate system.
႑
Scheduling the indoor comfort and hot water
Heating and hot water can be scheduled for each day of the week or for
longer periods (vacation).
႑
Large display with user instructions
The indoor module has a large display with easy-to-understand menus
that facilitate setting a comfortable climate.
႑
Simple troubleshooting
In the event of a fault, the indoor module display shows what happened
and the actions to be taken.
႑
Easy to install
The indoor module is easy to install together with NIBE F2026, F2300 or
other air water heat pump. When installing together with F2026 or F2300,
the heat pump's values can be read off from the indoor module's display.
7NIBE™ VVM 500Chapter 1 | Important information