Entering a code number (fast way)
This is the quickest way to enter a code number although it is not very safe because while the code
number is being memorised the receiver could receive a signal from another transmitter that is within
its range and memorise it.
You must take this risk into consideration when
deciding how to enter your code number.
This operation will also let you add the code number
of a new transmitter to the receiver’s memory.
1) Press the key on the receiver and hold it down:
the LED turns on and you must then:
2) Transmit the code number until the LED turns off
pressing any key on the transmitter.
3) Now release the transmitter key:
the LED will turn back on ready for a new operation.
4) Repeat the procedure from point 2 for the other
transmitters.
- 44 -
CH.1
CH.1
CH.1
CH.1
34 5678
MEMORIE
LED
PULSANTE
LED
PUSH BUTTON
Fig. 8
MEMORIES
To Next Page
Loading...
