Nice FLOR Series - Removing 2 nd Learning Disabling Function

3) Press the key during the 2
nd
flash and release it as soon as the LED turns off.
2 flashes follow: the 2
nd
should last longer than the first to indicate that the disabling function is active;
if this does not happen, repeat the procedure from the beginning.
REMOVING THE 2
ND
LEARNING DISABLING FUNCTION
To remove the learning disabling function you will need an authorised remote control.
1) Press the receiver key for a moment, the LED turns on for 5 seconds within which time you
have to:
2) Transmit the code until the LEDs turn off pressing any key on the transmitter.
3) Release the key on the transmitter and wait 1 second.
4) Transmit the code to confirm pressing any key on the transmitter; the LED will now flash 4 times
meaning that the code is already on the list.
5) Press the key during the 4
th
flash and let it go as soon as the LED turns off.
Two identical flashes will follow meaning that the disabling state is not active; if this does not happen,
repeat the procedure from the beginning.
- 49 -
GB