Nice FLOR Series - Verifying 2 nd Learning Disabling Function; Activating 2 nd Learning Disabling Function

CHECKING THE QUANTITY OF CODE NUMBERS STORED
- Press the receiver key TWICE.
- Count the number of flashes that follow: each long flash is a full memory; each short flash is a
code number (example valid for BM1000 memories:
(2 long flashes+10 short ones => 2x255 = 510 plus 10 = 520 code numbers).
If there are a lot of code numbers and you want to stop before getting to the end simply press the
key for 1 second.
VERIFYING THE 2
ND
LEARNING DISABLING FUNCTION
Press the key on the receiver for a moment and wait for the 2 flashes that indicate time end (about
5 seconds).
- If the 2
nd
flash lasts longer than the first it means the disabling function is active.
- If the duration of both flashes is the same it means the disabling function is not active.
ACTIVATING THE 2
ND
LEARNING DISABLING FUNCTION
1) Press the key on the receiver for a moment
2) Wait for the 2 flashes that indicate time end (about 5 seconds)
- 48 -