11
EN
DISPOSAL OF THE PRODUCT
This product constitutes an integral part of the automa-
tion system, therefore it must be disposed of along with it.
As in installation, also at the end of product lifetime, the disas-
sembly and scrapping operations must be performed by qua-
lified personnel.
This product is made up of different types of material, some of
which can be recycled while others must be disposed of. Seek
information on the recycling and disposal systems envisaged
by the local regulations in your area for this product category.
Caution! – some parts of the product may contain pollutant
or hazardous substances which, if disposed of into the envi-
ronment, may cause serious damage to the environment or
physical health.
As indicated by the symbol on the left,
disposal of this product in domestic
waste is strictly prohibited. Separate
the waste into categories for disposal,
according to the methods envisaged by
current legislation in your area, or return
the product to the retailer when purcha-
sing a new version.
Caution! – Local legislation may envisage serious fines in the
event of abusive disposal of this product.
OXI/A
•Decoding “O-Code/A” / “FLOR/A”
•Maximum absorption 30 mA
•Reception frequency 433.92 MHz
•Sensitivity Above 0.5 µV
•Operating temperature –20° C ÷ +55° C
•Outputs 4 (on “SM” connector)
•Dimensions and weight L. 50; H. 45; P. 19 mm;
weight 20
•Input impedance 75ohm
PRODUCT TECHNICAL SPECIFICATIONS
To Next Page
Loading...
Need help?
General
